Pick and Place Machine JUKI JX-100 JUKI Assembly Line SMT Machinery
The JUKI JX-100 pick and place machine is a high-speed and
high-precision machine used for electronic component placement on
printed circuit boards (PCBs). It is suitable for small to
medium-sized production runs and offers advanced features for
efficient and accurate component placement.
Specification:
Name: JUKI JX-100
Brand: JUKI
Model: JUKI JX-100
Condition: original
Quality: top qualiy
Stock: large
Warranty: 1 year
Delivery: fedex,ups,dhl,as required
Package: wooden case
Placement Accuracy: Laser Alignment (chip placements) (±50μm) at
+/- 3 Sigm
BOARD SIZE: Min.50x50～Max.800x360mm
Component Height: 12.0mm
Component Size: Min.(0201 inch)0603mm～ Max.33.5mm
PLACEMENT SPECS| Placement Speed (chip): | IPC9850: 15,300CPH
FEEDER INPUTS: 60 single 8mm Tape Feeder
| Board size: | Min. 50 × 50 ～ Max. 330 × 250 mm |
| Component size | Min. 0603mm(0201 Inch) ～ Max. □33.5mm |
| Component centering device | Laser centering (LNC60) |
| Placement speed (chip) | Chip | Optimum | 0.187Sec./chip(19,300CPH) |
| IPC9850 | 15,300CP |
Some key features of the JUKI JX-100 pick and place machine
include:
1. High-speed placement: The machine can place components at speeds
of up to 50,000 CPH (components per hour), allowing for fast
production times and high output rates.
2. High-precision placement: The JX-100 is equipped with advanced
vision systems and laser alignment technology to ensure accurate
component placement within tight tolerances.
3. Large component range: The machine is capable of placing a wide
range of components, including resistors, capacitors, ICs, and
LEDs, with sizes ranging from 01005 to 45x45mm.
4. User-friendly interface: The JUKI JX-100 features a
user-friendly interface with intuitive software that allows for
easy programming, setup, and operation.
5. Flexible feeder options: The machine supports various feeder
types, including tape, stick, and tray feeders, to accommodate
different component types and production requirements.
6. Automatic nozzle exchange: The JX-100 is equipped with an
automatic nozzle exchange system, allowing for quick and easy
nozzle changes to accommodate different component sizes.
To use the JUKI JX-100 pick and place machine, operators first need
to program the machine with the placement data for the PCB. This
can be done using the machine's software interface, where users can
specify component placement coordinates, orientations, and other
parameters.
Next, operators need to load the components onto the machine's
feeders and set up the PCB on the machine's worktable. The machine
will then automatically pick up components from the feeders using
its precision nozzles and place them onto the PCB according to the
programmed data.
Operators should regularly monitor the machine during operation to
ensure proper component placement and make any necessary
adjustments. After the placement process is complete, operators can
inspect the PCB for accuracy and quality before moving on to the
next production step.
Overall, the JUKI JX-100 pick and place machine is a versatile and
efficient solution for electronic component placement in PCB
assembly, offering high-speed performance, high-precision
placement, and user-friendly operation.
Photo show
