| Item | M3 III | M6 III |
| Applicable PCB size (LxW) | 48 x 48 mm to 250 x 510 mm (double conveyor)* | 48 x 48 mm to 534 x 510 mm (double conveyor)* |
| 48 x 48 mm to 250 x 610 mm (single conveyor) | 48 x 48 mm to 534 x 610 mm (single conveyor) |
| *Double conveyors can handle PCBs up to 280 (W) mm. PCBs larger
than 280 (W) mm must be produced by changing the double conveyor to
single lane production mode. | *Double conveyors can handle PCBs up to 280 (W) mm. PCBs larger
than 280 (W) mm must be produced by changing the double conveyor to
single lane production mode. |
| Part types | Up to 20 types of parts (calculated using 8 mm tape) | Up to 45 types of parts (calculated using 8 mm tape) |
| PCB loading time | For double conveyor: 0 sec (continuous operation) |
| For single conveyor: 2.5 sec (transport between M3 III modules),
3.4 sec (transport between M6 III modules) |
| Placement accuracy | H24G : +/-0.025 mm (Standard mode) / +/-0.038 mm (Productivity
priority mode) (3sigma) cpk≥1.00 | H24G : +/-0.025 mm (Standard mode) / +/-0.038 mm (Productivity
priority mode) (3sigma) cpk≥1.00 |
| (Fiducial mark standard) | V12/H12HS : +/-0.038 (+/-0.050) mm (3sigma) cpk≥1.00 | V12/H12HS : +/-0.038 (+/-0.050) mm (3sigma) cpk≥1.00 |
| * The placing accuracy is obtained from tests conducted by Fuji. | H04S/H04SF : +/-0.040 mm (3sigma) cpk≥1.00 | H08M/H04S/H04SF : +/-0.040 mm (3sigma) cpk≥1.00 |
| H08/H04 : +/-0.050 mm (3sigma) cpk≥1.00 | H08/H04/OF : +/-0.050 mm (3sigma) cpk≥1.00 |
| H02/H01/G04 : +/-0.030 mm (3sigma) cpk≥1.00 | H02/H01/G04 : +/-0.030 mm (3sigma) cpk≥1.00 |
| H02F/G04F : +/-0.025 mm (3sigma) cpk≥1.00 | H02F/G04F : +/-0.025 mm (3sigma) cpk≥1.00 |
| GL : +/-0.100 mm (3sigma) cpk≥1.00 | GL : +/-0.100 mm (3sigma) cpk≥1.00 |
| Productivity | H24G : 37,500 cph (Productivity priority mode) / 35,000 cph
(Standard mode) | H24G : 37,500 cph (Productivity priority mode) / 35,000 cph
(Standard mode) |
| * The throughput above is based on tests conducted at Fuji. | V12 : 26,000 cph | V12 : 26,000 cph |
| H12HS : 24,500 cph | H12HS : 24,500 cph |
| H08 : 11,500 cph | H08M : 13,000 cph |
| H04 : 6,500 cph | H08 : 11,500 cph |
| H04S : 9,500 cph | H04 : 6,500 cph |
| H04SF : 10,500 cph | H04S : 9,500 cph |
| H02 : 5,500 cph | H04SF : 10,500 cph |
| H02F : 6,700 cph | H02 : 5,500 cph |
| H01 : 4,200 cph | H02F : 6,700 cph |
| G04 : 7,500 cph | H01 : 4,200 cph |
| G04F : 7,500 cph | G04 : 7,500 cph |
| GL : 16,363 dph (0.22 sec/dot) | G04F : 7,500 cph |
| | 0F : 3,000 cph |
| | GL : 16,363 dph (0.22 sec/dot) |
| Supported parts | H24G: 0201 to 5 x 5 mmHeight: up to 2.0 mmV12/H12HS: 0402 to 7.5 x
7.5 mmHeight: up to 3.0 mmH08M: 0603 to 45 x 45 mmHeight: up to
13.0 mmH08: 0402 to 12 x 12 mmHeight: up to 6.5 mmH04: 1608 to 38 x
38 mmHeight: up to 9.5 mmH04S/H04SF: 1608 to 38 x 38 mmHeight: up
to 6.5 mmH02/H02F/H01/0F: 1608 to 74 x 74 mm (32 x 180 mm)Height:
up to 25.4 mmG04/G04F:0402 to 15 x 15 mmHeight: up to 6.5 mm |
|
| Module width | 320 mm | 645 mm |
| Machine dimensions | L: 1295 mm (M3 III x 4, M6 III x 2) / 645 mm (M3 III x 2, M6 III) |
| W: 1900.2 mm, H: 1476 mm |
| DynaHead(DX) |
| Nozzle quantity | 12 | 4 | 1 |
| Throughput(cph) | 25,000 | 11000 | 4700 |
| Parts presence function ON: 25,000 |
| Part size (mm) | 0402 (01005") to 7.5 x 7.5 | 1608 (0603")to 15 x 15 | 1608 (0603")to 74 x 74 (32 x 100) |
| Height:Up to 3.0 mm | Height:Up to 6.5 mm | Height:Up to 25.4 mm |
| Placing accuracy | +/-0.038 (+/-0.050) mm (3σ) cpk≥1.00* | +/-0.040 mm (3σ) cpk≥1.00 | +/-0.030 mm (3σ) cpk≥1.00 |
| (Fiducial mark based referencing) | *+/-0.038 mm obtained with rectangular chip placement (high |
| accuracy tuning) under optimal conditions at Fuji. |
| Part presence check | o | x | o |
| Parts supply | Tape | o | o |
| Stick | x | o |
| Tray | x | o |
| Parts supply system |
| lntelligent feeders | Support for 4, 8, 12, 16, 24, 32, 44, 56, 72, 88, and 104 mm wide
tape |
| Stick feeders | 4 ≤ Part width ≤ 15 mm (6 ≤ Stick width ≤ 18 mm), 15 ≤ Part width ≤
32 mm (18 ≤ Stick width ≤ 36 mm) |
| Trays | Applicable tray size: 135.9 x 322.6 mm (JEDEC standard) (Tray
Unit-M),276 x 330 mm (Tray Unit- LT), 143 x 330 mm (Tray Unit-LTC) |
| Option |
| Tray feeders, PCU II (Pallet Change Unit), MCU (Module change
unit), Engineering panel stand, FUJI CAMX Adapter, Nexim Software |
